Remove a door panel
Firstly remove the triangular tweeter cover by pulling at the top corner. It’s fairly tight so you may need to prise it out.
Remove the power window control panel by prising up the bottom edge, and disconnect the plugs from the back of it.
Then remove the fixings from the door panel
1 - Two screws with press-on plastic caps.
2 - Five screws.
3 - Three plastic push in studs.
4 - Remove visible screw, remove plastic trim, remove second screw behind.
Pull the bottom edge out slightly and unplug the red door light.
The panel is now hanging on the top edge of the door, just lift it off.
The door mirror is held by three bolts (10mm socket), two of which also hold the tweeter in place.
